Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's all-in-one design concept ensures that by just plugging in a single power cable and making a few simple, intuitive connections, anyone can be their own sound engineer.
Despite being a mixer and an amplifier in a single unit, the EMX2's dimensions (37.5cm x 22cm x 15cm / 14.8" x 5.8" x 8.7") are surprisingly modest, making it easy to fit along with speakers even in the trunk of a small car. The lightweight body also features handles for a superior level of portability that will benefit anyone setting up a PA for applications where time is a consideration.
The EMX2's flexible connectivity allows you to use up to 4 microphones for singing along with musical instruments, or speaking/ making announcements along with BGM or recorded audio from a portable playback device. The unit also comes equipped with Phantom Power and high-impedance input capability allowing you to use high-performance condenser microphones or connect guitars directly without any external gear. And because the EMX2 is also an amplifier, you can easily connect passive speakers to complete your sound system, or even add a Yamaha DXS Series Powered sub-woofer via a single connection, for configuring a PA system for applications that require a more prominent bass performance, such as a DJ event in a small club or outdoor venue.
For decades, the sound specialists at Yamaha have been developing high-quality reverb effects to add an atmospheric touch to our users vocal and instrumental performances. The EMX2 features someof the most commonly used and practical reverb algorithms, using a single knob to easily select and control the depth for one of four effects; HALL mimics the sound characteristics of a large hall, PLATE for a more classic, defined sound, ROOM adds a more intimate sound to performances, and ECHO gives instruments or vocal a more professional edge, as well as being an attractive option for KARAOKE.
Few things make a live performance or speaking engagement take a negative turn like the sudden, uncomfortable, and often embarrassing howling of unwanted feedback. Luckily the EMX2 comes equipped with a Feedback Suppressor that utilizes a unique Yamaha digital technology to instantly eliminate annoying feedback with the single switch of a button.
For adding the final touch to your mix, the EMX2's 1-Knob Master EQ™ lets you apply optimized EQ settings with the simple turn of a knob. The SPEECH setting is geared towards meetings, seminars, or conferences with a limited lower end for clear, defined speech; MUSIC offers a more balanced sound tailored to acoustic or band performances; and BASS BOOST is ideal for DJ performances or audio playback that puts a priority on emphasizing the base sound.
Using an optional rack-mount kit, you can seamlessly add the EMX2 to a rack configuration or and existing installed application. You can even mount the EMX2 on a microphone stand using a simple mic-stand adaptor, giving you quick, convenient, manual control of all the relevant features.
|I/O||Inputs||TOTAL 10ch : Mono (MIC/LINE):4, Stereo(LINE):3|
|Phantom power||CH1, 2 : +30 V|
|Outputs||SPEAKERS [L, R], MONITOR OUT [L,R], SUBWOOFER OUT|
|Control and others||FOOT SW : Effect Mute on/off|
|Bus||Stereo: 1, Effect: 1|
|Input Channel Function||PAD||26 dB (CH1-4)|
|EQ HIGH||8kHz +15dB / -15dB|
|EQ MID||2.5kHz +15dB / -15dB|
|EQ LOW||100Hz +15dB / -15dB|
|On-board processors||DSP||SPX Algorithm Reverb 4 programs, MASTER EQ (SPEECH to MUSIC), Feedback suppressor|
|On-board amplifiers||Maximum output power @4ohms||1kHz THD+N less than 10% (CEA2006) : 250 W + 250 W, 1kHz THD+N less than 1% : 110 W + 110 W|
|Maximum output power @8ohms||1kHz THD+N less than 10% (CEA2006) : 170 W + 170 W, 1kHz THD+N less than 1% : 110 W + 110 W|
|Level Meter||6points (-20, -6, 0 , +3, +6, LIMITER)|
|Frequency response||Input to SPEAKERS : +1 dB/-4 dB (40Hz to 20kHz), Input to MONITOR OUT : +0.5 dB/-1.5 dB (20Hz to 20kHz) , refer to the nominal output level @ 1 kHz|
|Total harmonic distortion||Input to SPEAKERS : 0.2 % @ 13.8 W (40Hz to 20kHz), 0.4 % @ 23.2W (1kHz), Input to MONITOR OUT : 0.05 % @ +10 dBu (20Hz to 20kHz) 0.009 % @ +20 dBu (1kHz), (THD+N, Measured with 22 kHz LPF)|
|Hum & noise level||Equivalent input noise||-115 dBu|
|Residual output noise||Input to SPEAKERS : -68 dBu (40Hz to 20kHz, MASTER: min), Input to MONITOR OUT : -99 dBu (20Hz to 20kHz, MONITOR: min)|
|Crosstalk||-80 dB (1 kHz, Measured with 1 kHz band pass filter)|
|Protection circuit||Load protection||DC-fault|
|Amplifier protection||Over heat protection, Over current protection|
|Power requirements||AC 100-240V, 50Hz/60Hz|
|Power consumption||35W (Idle) / 90W (1/8 Power)|
|Dimensions||W||375 mm (14.8")|
|H||147 mm (5.8")|
|D||220 mm (8.7")|
|Net weight||4.2 kg (9.3 lbs.)|
|Accessories||Owner’s Manual, Technical Specifications, Power Cord (2m)|
|Options||Foot Switch: FC5, Mic Stand Adaptor: BMS-10A, Rack mount kit RK-EMX2|
|Others||Operating Temperature : 0 to +40℃|