Stepping up to a T-7 or T-9 produces a huge increase in performance over the smaller, less expensive down-firing models (T-zero/T-5). T-7 adds a forward-firing 10” passive, along with a high current 200W Class A/B amp with remote-mounted toroidal transformer to a superb 8” down-firing active driver. The combination of a larger cabinet, the driven cone area of a 13” driver, results in powerful performance you can feel.
T-7’s rear panel embodies classic REL quality. Note. The larger heatsink allows T-7 to run cool for years, and a full REL connectivity suite that allows for both perfectly blended musical sub bass, as well as powerful, concussive Home theater bass. large soundfield reproduction, mates with medium-sized tower speakers And quality monitors.
The amplifier design for T-7 is a high current 200W Class A/B linear power amplifier. These workhorse amps have proven themselves in over 50,000 units to date, with excellent reliability.
REL’s latest input filter design is borrowed from its more expensive sibling (Serie R) and is considerably quicker than previous REL designs. This speed is partly responsible for the slam and attack for which Serie T is known. Note the separate volume controls for High Level and .1 that allow perfect levels for music and home-theater. With REL, there is no need to turn it up for theater, then turn it down for music.
REL Theater Reference: Note the High Level Connection that allows seamless blend of sub with main speakers. Note also the .1 input which can be used simultaneously with the high level connection to provide a unique Home theater experience that provides truly immersive bass due to the restoration of low bass in the soundtrack to the main speakers.
REL uses a quality stamped steel-frame 8” Ultra Long Throw (ULT) driver in the T-7. REL drivers are a big part of our success, with much care and attention paid to producing truly low bass from relatively small drivers, and then engineering them to be able to withstand high power and output for long periods of time. T-7 features a forward-firing 10” coated paper passive for much greater driven surface area.
Type: Passive Radiator, front-firing passive radiator, down-firing
Active Drive Unit: 8in., 200 mm long-throw, steel chassis
Passive Radiator: 10in., 254 mm
Lower Frequency Response: 30 Hz at -6 dB in room
Input Connectors: Hi Level Neutrik Speakon, Lo Level single phono, LFE phono
Input Impedance: High Level: 150k, Low Level: 10k, .1/LFE: 10k ohms
Gain Control Range: 80 dB
Power Output: 200 Watts (RMS)
Phase Switch: Yes, 0 or 180 degrees
Amplifier Type: Class AB
Fully Electronic SET-SAFE: Yes
D.C. Fault: Yes
Output Short: Yes
Mains Input Voltage: 220-240 volts, 110-120 volts for certain markets
Fuses: 2 Amp semi delay 230 volts operation,
4 Amp semi delay 115 volts operation
Dimensions (WHD), Including Feet: 12 x 13.75 x 13.75 in., (305 x 349.2 x 349.2 mm)
Net Weight: 230V: 31 lbs. (14.1 kg) 115V: 34 lbs. (15.4 kg)
Finish: Gloss Piano Black or White Lacquer
Mains Lead: Yes
Neutrik Speakon Interconnect: Yes (10 Meters Nominal)
Users Manual: Yes